Frieren Clone Head

Hello, As promised, I'm sharing the STL file for this little project I made.

As you can see, my primer coat and sanding are far from perfect. I'm counting on you to do better than me, haha ^^' .

Furthermore, as you can see, there are gaps between certain pieces. This is because they are held together only by putty and not by glue or magnets. Once glued, most of these gaps are much less noticeable.

🛠️ Resin Recommendation: I recommend using resilient and flexible resin like ABS.

📏 Scale Recommendation: I suggest printing the figurine at a minimum scale of 1000% (it's originally at 100%, so multiply the size by 10).

✅ Size Testing: Since I've tested it, you ensure that no major size-related issues arise with this scale.

🔧 Pause Technique: You can use small brass rods like me (10 cm in height, 0.3 cm in radius) to properly pause the figurine during printing.

🖼️ Support Suggestion: I encourage you to place the figurine on a cool support (like a wooden block) rather than using the small support rectangle I included with the files (it will look better).